Description
Crack Repair Kit
You grab this concrete Crack Repair Kit and tackle up to 25 feet of cracks or controlled saw cuts right away. First, you receive two 9-ounce tubes of 116 Caulk, so you squeeze strong, flexible sealant directly into every gap. Next, you get 25 feet of 1/4-inch wide backer rod, which you push firmly into cracks 1/4 inch wide or smaller. Then, the included 1-quart bottle of finishing sand lets you sprinkle and level the surface for a smooth, professional look.
Moreover, this all-in-one bundle saves you some cash compared to buying each item separately. Therefore, you enjoy a discount while stocking everything needed for the job. Now, why bother repairing those cracks or break control saw cuts? Because un-repaired cracks let water sneak under your concrete slabs fast. Soon, that water freezes, expands, and wreaks havoc. However, when you seal cracks properly, you block water penetration completely. As a result, your slab lasts many extra years. You’ll cut future maintenance costs dramatically, especially when paired with Extreme Penetrating Sealer (EPS) that permanently waterproofs the concrete.
Instructions
Clean out the cracks as well as possible. A shop vac and firm bristle brush work well for this. Insert the backer rod, apply the 116 Caulk generously, and finish with sand. Consequently, your driveway, patio, or garage floor stays strong and attractive season after season. Finally, this simple weekend project protects your investment and gives you peace of mind for years to come.
Crack Repair
- Cut the crack open with a concrete blade, hand grinder, or Dremel. Vacuum out the crack after.
- Insert the backer road about 1/4″ – 3/4″ deep.
- Fill the joint with 116 caulk and cover with finishing sand.
Joint Sealing
- Clean the saw cut joint out using a shop vac.
- Insert the backer road about 1/4″ – 3?4″ deep.
- Fill the joint with 116 caulk and cover with finishing sand.
Screenshot
