SealGreen Efflorescence Remover is for removing efflorescence, salts, minerals and hard water deposits from pavers, split block, clay brick, cinder blocks and natural stones.
- Effectively Removes Efflorescence
- Heavy Duty Surface Cleaner
- Prepares Unsealed Surfaces for Sealing
- Concentrated Formula
SealGreen Efflorescence Remover is odorless and safe. Its active ingredient is a derivative of a natural protein component and is used in certain medications, in food and food flavoring agents, and as an antimicrobial agent. The active ingredient in SealGreen Efflorescence Remover also occurs naturally in the stomach during digestion.
SealGreen Efflorescence Remover is buffered, non-acid, organic salts, technologically advanced concentrated cleaner designed for the removal of efflorescence, mineral and salt deposits from virtually any type of hardscape surface with minimal or no brushing.
SealGreen Efflorescence Remover allows residue to be quickly and easily rinsed away with a high or low-pressure washer.
SealGreen Efflorescence Remover is a biodegradable and environmentally friendly phosphate free formula which replaces several types of harsh acid cleaners. Its alkaline nature will help neutralize acid-based detergents and cleaners.
SealGreen Efflorescence Remover does not remove unidentified white stains. The product was exclusively design for efflorescence removal.
The best way is to apply SealGreen Efflorescence Remover with a garden pump sprayer. Allow it to remain for 5 minutes and then rinse with a pressure washer.
In general, cleaning efflorescence from a surface is an ongoing solution rather than a cure. Sealing a surface might be a solution, but if water still finds its way into the surface, you could end up with spalling, which is a destructive process that should be avoided.
Efflorescence occurs as the surface heats up from exposure to the sun and the water inside the concrete or brick will evaporate and move the salts to the surface
Note: This product is ideal for temperatures from 45° to 90°F for removing calcium carbonate and magnesium carbonate.
Ideal for concrete and clay pavers, concrete flat work and retaining walls. Can also be used on manufactured and natural stone, concrete block, and wet cast products. Works on both horizontal and vertical applications.
SealGreen Efflorescence Remover is compatible with all SealGreen Sealers with proper dilution, dwell time and application. Misuse may cause damage to the sealer. A test area is always recommended to determine product suitability and compatibility with your specific surface before use and if desired results are achievable.
1 Gallon Concentrate – Mixed 1 part Remover (1 gal) to 4 parts water (4 gal) makes 5 gallons and covers 600 to 800 Sqft
Coverage rates will vary depending on the surface porosity, texture, severity of staining, application method and other local conditions. Coverage rates shown are based on single treatment. Some applications may require additional treatments.