SCR1600 Coatings Remover Paints, Acrylics and Sealers with SealGreen Oil Cleaner/ Degreaser
SCR1600™ works on:
- Lead-based paints
- Easy to apply – No “hard work” like scraping and sanding
- Bio-degradable and environmentally safe
- Low odor and non-flammable unlike solvents
SCR1600 is a better way to remove paints, urethanes, acrylics, epoxies, enamels, and non-penetrating sealers from concrete or wood without the challenge of sanding or scraping.
We recommend testing the product before buying large quantities.
SealGreen products all ship FREE but only by UPS ground shipping. No rush shipping!
Coverage is approximate depending on concrete porosity and material to be removed. Test first before buying large quantities.
1-Gallon covers about 125 square feet.
SCR1600 performs better when the floor temperature is between 65 and 90 degrees Fahrenheit. Temperatures below 65 degrees will slow down the effectiveness of the product. Allowing SCR1600 to dwell longer on the surface will remove more material.
Apply a thick layer of SCR1600 Coatings Remover. It very important to apply a thick, even layer as this helps the SCR1600 remove the paint or sealer. Applying too thin of a layer can reduce working power.
Let the SCR1600 sit. The rule we use is “the tougher the coating, the longer we let it sit.” For most uses it is good to let it sit for 8 or 12 hours but for two-part coatings, like epoxies, it can take up to 24 hours.
Wash Floor (SealGreen™ Oil Cleaner/ Degreaser™) is included with every order of SCR1600)
SCR1600 Coatings Remover performs better when the floor temperature is between 65 and 90 Degrees Fahrenheit. Temperatures below 65 degrees will slow down the effectiveness of the product.